 | Electronic odometer module built in |
| Three crystal oscillators, two of which provide continual
self check of time base accuracy and error detection circuitry |
| Serial port for a communication link with an external
printer, video camera, heads-up display, or computer training aid |
| High intensity display automatically adjusts the
intensity as the ambient light changes |
| Accurate speed measurement well above 100 mph |
| Equipped with time of day clock, 12 or 24 hour format |
| Displays elapsed time or distance during the clock |
| 10 year internal lithium battery backup power for
calibration and clock information |
| The "BOTH" toggle switch replaces the double
switching method |
| Sealed membrane switch front panel, reinforced by metal
plate, highly water resistant, (splash and spill proof), excellent for
motorcycle operation |
| Patrol mode provides an accurate speedometer |
| All functions are menu driven for simplicity |
| Rugged, cast aluminum case, gasket sealed front and rear |
| Updates programs by inserting a new micro chip |
| Automatically clears itself when starting a new speed
check |
| Recalls either time or distance after completing a speed
clock without erasing the calculated speed |
| Measures the time interval between vehicles to an
accuracy of less than 0.1 seconds for following too close violations |
| Speed accuracy of 0% to -2% from 0 to 100 mph (in favor
of the suspect vehicle) |
| An input range of 10 VDC to 20 VDC with a current draw of
less than 0.75 amps |
| Distance measurements up to 100 miles in increments of
0.0002 feet. Automatically converts the measured distance from miles to feet. |
| Physical dimensions: 6.25 x 2.20 x 2.75 inches (15.9 x
5.6 x 7.0 cm) |
| Isolated contacts to trigger external devices such as
cameras, printers, and training aids |
| Heat resistant power supply cable and odometer cable |
| Monitoring circuitry that detects switch wear |
| Single window display |
to
contact us:
We
now accept VISA and MasterCard