The Features and Benefits of the VASCAR-plus® IIIc Model

Home > Products and Services > VASCAR-plus®IIIc

VASCAR-plus ®IIIc

Traffic Safety Systems, Inc., has manufactured the VASCAR average speed computer for over thirty years. We are pleased to announce the next generation of time / speed / distance measurement devices, the VASCAR-plus® IIIc. The VASCAR-plus® IIIc utilizes the latest in microprocessor technology and has innovations and features which make it the most dynamic and cost effective speed measurement device on the market today. The VASCAR-plus® IIIc in similar form to its predecessor the VASCAR-plus® III, it is easier to use, simpler to install and less expensive to maintain.

Simple Installation

Advanced Electronics and simple 3-wire installation allow the VASCAR-plus® IIIc to be installed in any vehicle with digital electronics without additional components or unit modifications. Easily moved among vehicles of different make or model.

Features:

	Displays all features at once
	Quicker functions
	Electronic odometer module built in
	Two crystal oscillators provide continual self check of time base accuracy
	Error detection circuitry
	High intensity display automatically adjusts the intensity as the ambient light changes
	Accurate speed measurement well above 100 mph
	Displays elapsed time and distance during the clock
	Sealed membrane switch front panel, reinforced by metal plate, highly water resistant, (splash and spill proof), excellent for motorcycle operation
	Patrol mode provides an accurate speedometer
	Stores up to eight clocks

Specifications:

	Serial port for a commutation link with an external printer, video camera, heads-up display, or computer training aid
	Rugged cast aluminum case, gasket sealed front and rear
	Calibrates by using its internal time crystal. No stop watch needed
	Automatically checks accuracy of quartz crystal with a self test each time unit is turned on
	Updates programs by inserting a new micro chip
	Automatically clears itself when starting a new speed check
	Measures the time interval between vehicles to an accuracy of less than 0.1 seconds for following too close violations
	Speed accuracy of 0% to -2.3% from 0 to 100 mph (in favor of the violator)
	An input range of 10 VDC to 20 VDC with a current draw of less than 0.75 amps
	Distance measurements up to 100 miles in increments of 0.0002 feet.
	Automatically converts the measured distance from miles to feet
	Physical dimensions: 6.5”W X 2.312”H X 2.125”D
	Protected from an input over-voltage and polarity reversal
	Heat resistant pig-tail connector
	Monitoring circuitry that detects switch wear
	Measures true time in increments of 0.01 seconds up to 10 hours
	Three Color window display

Added Specifications:

	Quartz crystal performs accuracy self-test every time unit is turned on
	The VASCAR-plus® IIIc stores up to eight speed clocks
	Input over-voltage and polarity reversal protection
	Mil Spec switches; switch wear detection circuitry
	Display automatically adjusts as ambient light changes
	RS-232 output to printer or to “stamp” video
	Distance measurements up to 100 miles in increments of 0.0002 feet
	Measures true time in increments of 0.01 seconds up to 10 hours
	Three year parts and labor warranty